Designed specifically for coliform testing, the Model 8306 features the PolyScience Standard Controller and is factory preset at 44.5°C, the standard coliform test temperature. It also incorporates three additional preset temperature buttons which can be used to rapidly change to other common coliform test temperatures, such as 45.5°C, 41.5°C, and 35.0°C, or other temperatures from ambient +5°C to 150°C.

Bath temperature is displayed on a bright LED readout. A quick press of a knob displays set point and also selects temperature units (°C or °F).

For operational convenience, the Model 8306 is equipped with a tilting, see-through polycarbonate cover which drains back into the bath when opened and an integral 2-speed (simplex) pump which can be used to circulate the bath liquid to other instruments using a closed loop configuration.

All wetted components are corrosion-resistant 300 stainless steel. The outer case is protected with a durable, easy-to-clean epoxy powder coating.

FEATURES

Easy-to-Use Microprocessor Controller

Three Preset Temperatures Buttons Permit Rapid Temperature Set Point Changes

28 Liter Reservoir

External Circulation Capability

Hinged, See-through Cover

The Model 8306 Circulating Water Bath is an excellent general purpose bath suitable for a wide variety of laboratory applications, including those requiring external circulation. It is supplied with a sample tray for the bath bottom and thermometer clip. (Thermometer not included).

APPLICATIONS

Standard Method
Coliform Testing

General
Bacteriological Testing

Incubation

Routine
Laboratory Use

Sample Tempering

CIRCULATE TO:

Refractometers

Spectophotometers

Extractor
Concentrators