ACCESSORIES
FOR CIRCULATORS |
|
| CATALOG # | ITEM DESCRIPTION |
| 4-300040 | Lab
Algicide |
| 4-300050 | A concentrated liquid for cleaning, removing rust & mineral deposits from stainless steel and plastic baths. For best results, use at elevated temperatures. Helps remove existing algae prior to treatment with Lab Algicide. 1 oz. treats approximately 2 gal. |
| 4-300052 | Same as above in a 16 oz. bottle. |
| 040250 | Model 20 Bath Cooler 120V, 60Hz |
| 040251 | Model 20 Bath Cooler 240V, 50Hz |
| 050300 | Cooling
coils for immersion circulators Model 71 and 7306. The stainless steel coil, when connected to a water source, permits more rapid cool down from high temperatures or better control when operating close to ambient temperatures. Not recommended for use in circulator baths where fluid temperature exceeds boiling point of water. For high temperature cool-down, we recommend PolyScience Model 20. |
| 060300 | Cooling coils for heating circulators |
| 060301 | Hollow
Plastic Floating Balls - 3/4 in. (20mm) diameter, Pack of 400 Create a blanket of insulation in any open bath, reducing heat loss 75% and evaporation by 87%. Reduce fumes and splashing hazards. Usable to temperatures to 110°C and in most bath fluids. Made of polypropylene. |
| 060304 | Tubing Clamp for 3mm to 13mm tubing |
| 060305 | Brass Reducing Adapters, 8mm I.D. (Set of 2) |
| 060306 | Brass Reducing Adapters, 3mm I.D. (Set of 2) |
| 060307 | Buna N Tubing, 5/16 in. (8mm) I.D. per yard (.9m) |
| 060308 | Buna N Tubing, 1/2 in. (13mm) I.D. per yard (.9m) |
| 060309 | Insulation for 5/16 in. (8mm) tubing per yard (.9m) |
| 060310 | 3 ft. (.93m) flexible Teflon® lined, stainless steel overbraid tubing with 1/4 in. NPT quick connects at both ends. Maximum temperature use 300°C. |
| 060311 | Insulation for 1/2 in. (13mm) tubing per yard (.9m) |
| 060312 | Low
Temperature Insulated Tubing - 6 ft. (1.9m) Minimizes temperature loss from a circulator to external device. 6 ft. (1.9m) of 1/2 in. (1.27cm) I.D. Buna N tubing with foam insulation. |
| 060314 | Tube, Hose Barb ¼ MPT to 13mm Brass (set of 2) |
| 099590 | Thermometer, Glass, -20°C to 150°C |
| 510-011 | Circulator
Adapter Kit Contains (3) nylon fittings; ¼, 3/8, 3/16 barb x ¼ MPT |
ACCESSORIES
FOR PROGRAMMABLE CIRCULATORS
|
|
| CATALOG # | ITEM DESCRIPTION |
| 060101 | Remote Probe - 10 ft. (3 m) |
| 060105 | Remote Probe - 25 ft. (7.6m) |
| 060110 | Remote Probe - 50 ft. (15.25m) Custom lengths available on special order. For circulators with programmable controller. Permits point of control to be switched from inside programmable circulator bath to a remote location such as an open tank. Compensates for heat losses through tubing between the circulator and the control point. Platinum RTD sensor with stainless steel sheath 3/16 dia. x 6 in. long (.47dia. x 15.2cm). One inch (2.54cm) rubber coupling connects sheath to flexible cable. Probe cable ends in DB9 female plug. |
| 060120 | Digital to Analog Adapter For circulators with programmable controller when direct digital control is not required. Connects to the RS-232 port and provides 10mv/degree analog signal for external monitoring or control. |
ACCESSORIES
FOR CHILLERS
|
|
| CATALOG # | ITEM DESCRIPTION |
| 060302 | Chiller External Pressure Reducer For chillers equipped with high pressure, positive displacement pumps capable of producing 20-100 psi. (Models ending in ãPä). Reduces the output of the chiller to an adjustable range of 10-45 psi. |
| 510-213 | Chiller Adapter Kit Contains Two (2) Pairs of nylon 90º elbow fittings: ½ä male NPT x ½ä hose barb, ½ä male NPT x 5/8ä hose barb . |
ACCESSORIES
FOR WATER BATHS
|
|
| CATALOG # | ITEM DESCRIPTION |
| 040649 | Concentric Ring Set (Lid and 4 rings) Evaporate liquids, solvents, or melt solids. Concentric rings are flanged-formed stainless steel and fit flush with top plane of bath. Removal of rings reveal openings of 13/16 in. (3cm), 11/16 in. (4.3cm), 25/16 in. (5.9cm), and 31/16 in. (7.8cm). |
| 040678 | Concentric Ring Cover - 10L, 4-hole cover with 4 ring sets |
| 040679 | Concentric Ring Cover - 20L & 28L, 6-hole cover with 6 ring sets |
| 040800 | Flask Holder, 25ml |
| 040802 | Flask Holder, 50ml |
| 040804 | Flask Holder, 125ml |
| 040806 | Flask Holder, 250ml |
| 040808 | Flask Holder, 500ml |
| 040810 | Flask Holder, 1000ml |
| 510-117 | Shaker Attachment Lid, 20 & 28 Liter |
SAFETY
MATEú, Safety Interlock & Remote Control Accessory
|
|
| CATALOG # | ITEM DESCRIPTION |
| 060480 | Safety Mate, 120V, 60 Hz |
| 060480-SSR | Safety Mate, 120V, 60 Hz, with Solid State Relay |
| 060485 | Safety Mate, 240V, 50 Hz |
| 060485-SSR | Safety Mate, 240V, 50 Hz, with Solid State Relay |
BATH FLUIDS Low Temperature - Dynalene HC-50™ combines the low temperature performance of synthetic organic and silicone fluids while extending the properties of familiar aqueous based glycols. Excellent low temperature performance without toxicity or risk to the environment, equipment or personnel. High Temperature - Dow Corning® silicone heat transfer fluids provide superior thermal stability over their temperature ranges. Check bath system compatibility before using. Compatible with stainless steel, not compatible with Buna or natural rubber.
*Due to high viscosity, Silicone fluids 510, 550 and 710 are not recommended for use below 90°C. *Dow
Corning fluids are produced by and registered TMs of Dow Corning Corporation.
Dynalene HC is a registered TM of Advanced Fluid Technologies,
Inc |
