 PROGRAMMABLE DIGITAL STANDARD ANALOG |
|
The Programmable Controller offers the greatest number of features with the simplicity of a one-touch, multi-function, Select/Set knob. The multi-language LCD graphics readout simultaneously displays your set point and actual fluid temperature. The built-in timer provides visual and audible indications of timed events. The display also lets you know when it's time for calibration interval or service attention, this insures accuracy and eliminates downtime. Time/temperature programs can be set up directly by the controller's Select/Set knob. Ten programs can be stored in the controller's memory, each having up to 50 steps that can be cycled up to 999 times. An RS-232 interface is standard. Data logging can be viewed from the graphics display or via your PC. Included software supports National Instruments LabView™, Microsoft® Excel and Palm® OS. Remote probe capability is one of the strongest reasons for choosing the programmable controller. The optional probe can take over temperature control at the point of application, such as in a remote bath. Temperature shifts due to heat loss along tubing lines are eliminated and accuracy is maintained. Programmable units are accurate to ±0.25°C, and stable to ±0.01°C. The microprocessor controller can be tuned to optimize PID performance for various fluids and volumes. User adjustable high and low temperature limits and alarms are stored in non-volatile memory. A redundant safety thermostat protects over temperature and low liquid situations. On-demand automatic refrigeration control is standard on all refrigerated programmable units. The programmable units can be used for open or closed loop applications with it's 5-speed pressure/suction (duplex) pump. |
FEATURES
Time/temperature
programming Full graphic display with multi-language help menus 200ºC temperature control Optional remote probe capability RS232 interface
5-speed
Use with National Instruments
Easy-to-use Readout in ºC or ºF |
|||||||||||||
|
|
